What are the main binding methods in custom Notebook Printing products

custom Notebook Printing products https://www.thpkgg.com/Notebook.html

Friends who have been in contact with the album know that after the completion of the custom Notebook Printing products are required to bind, so what are the common binding methods?

First, flat order

Nails rust over time, resulting in loose pages, and are rarely used. Another disadvantage is that the flat booking must occupy a certain width of the opening, that is, the position of the booking and the book have a distance, so that the page can only be "not fully open" shape, which is not convenient to read, generally suitable for more than 300 pages of brochures.

Second, riding set

The pages rely on two wire nails, and the staples used in ordinary people are about the same, the picture book riding price is relatively cheap, but it is not suitable for too thick picture books, and Xing thinks that the number of pages within 28 is already the limit, and the thick book riding is not a grade.

Three, wireless binding

The effect of wireless binding is very good, at present, a large number of album binding are using this binding method. However, because there is no corresponding industry standard or national standard for the quality of hot melt adhesive, the use method is not standardized. Therefore, the quality of binding books has not reached a satisfactory level. Some of the poor quality of the glue did not take long to dry and crack, especially in the north dry, the whole book fell apart. If conditions permit, if you want to keep the book for a longer time, you can especially put forward good quality glue.

Four, lock the line

Also called string booking, although the book block is relatively firm, but because the back of the book is more stapled, resulting in poor flatness.

Five, lock line glue back binding

Lock wire glue back binding is also called lock wire glue, the process is first lock wire and then glue, glue no longer milling back. The bookbinding method is strong and smooth, and there are more books using this method at present.

Six, plastic wire stamping

At present, this method belongs to the more advanced loading method, which is characterized by the book in the book block after two times of bonding, the first bonding function is to bond the plastic thread stitching foot with the book sheet, so that the book pages in the book sheet can be fixed; The second bonding is to bind the book core of the plastic wire into the book core through the wireless adhesive binding, and the book core formed by this method is very strong, and because it does not use the milling back to beat the wool, it reduces the influence of poor gum on the quality of the binding.

custom Notebook Printing products https://www.thpkgg.com/Notebook.html


freakishlife

24 Blog posts

Comments