For different types of vehicles, the choice of cat m1 gps tracker is also different, and the suitable location for installation is also different. There are differences in the installation positions of common OBD interfaces, wiring types, and wireless no-installation types. The right installation location and environment are also important prerequisites for the cat m1 gps tracker to work better.

OBD interface car cat m1 gps tracker installation location is the most limited. Look at the name can also understand that it must be connected to the OBD interface of the car, so its position is generally in the cockpit of the car.

The installation position of the wired positioner should be more flexible than that of the OBD interface. A wired locator can be installed anywhere it can be connected to a car circuit. Common installation positions are: the front and rear bumpers of the car, pedals, the position of the headlights above the front windshield, and the interior of the lower decorative board, around the dashboard, and so on. The only thing to consider is that the locator requires a car power supply.

The wireless installation-free locator is the most convenient of the three types to install. Because it is strong magnetic free installation, not restricted. In addition to the engine, air conditioning outlet and other high temperature and high humidity places, the place where the iron can be adsorbed on the car can become its installation location. Of course, whether it is wired or wireless, it is necessary to avoid affecting the installation position of signal reception.

After the locator is installed, pay attention to daily maintenance, so as not to affect the normal operation of the equipment, but also to extend the service life of the equipment. Let's say:

The positioner installed in the bumper is waterproof because the environment is external, and it should be noted that the positioner should be fixed with tape and so on. The car will inevitably encounter uneven road surface and bumpy driving in the process of driving, the locator is not fixed, it is easy to fall off, and the locator is in a bumpy vibration environment for a long time will also affect it.

Like the wireless no-installation type positioner, in addition to the normal waterproof and anti-high temperature, it is also necessary to pay attention to the strong magnetic adsorption, for the sake of insurance or use tape to stabilize it; And the front of the locator should be mounted upward, so that the normal reception of the satellite signal can be maintained.

It is best to find a professional installer for installation, so as to avoid short-circuit or poor contact caused by positive and negative electrode connection during installation.

cat m1 gps tracker https://www.eelinktracker.com/lte-CAT-M1-vehicle-gps-tracker-tk319.html