Electric welding should be based on the bare wire diameter to select the relative output power of the electric ferrochrome, each contact of the welding time generally does not exceed 5s, should be careful not to let the flux into the conductor and insulator to prevent the reduction of commodity grounding resistance. Note when selecting the crimping method that crimping quality can only be ensured when the high quality din 41612 type b connectors contacts, power lines, special crimping tools and crimping procedures are precisely planned and controlled.

Before clamping the vehicle harness, the tail note should be screwed, otherwise it is easy to damage the external thread of the cover shell and the tail note. When connecting tail connectors with anti-turn devices (anti-turn keys, etc.), the tail connectors and anti-turn devices on the power plug or power socket should be pointed, otherwise the anti-turn and other functions will be missing and the high quality din 41612 type b connectors and tail connectors will be destroyed. When fixing stationary cables, tighten the screws on one side of the cable clamp so that the cable clamp snaps to the tail note, and tighten the screws on the other side to clamp the cable.

high quality din 41612 type b connectors Maintenance

When carrying out maintenance cleaning, anhydrous ethanol can be used to clean with high-grade linen, do not use organic chemical organic solvents such as toluene to clean, because this cleaning fluid may cause harm to the electrical connector.

After cleaning to the back to thoroughly dry to the back of the gas application. Before terminating high quality din 41612 type b connectors, it is necessary to master the terminating specifications and query the high quality din 41612 type b connectors. After the query is perfect, it is more serious to carry out the termination according to the requirements of the specification, in addition, pay attention to the termination according to the matching connection point number. The thickness of the larger cable sheath between the cable transmission wire should be matched with the distance between the contact parts, the cable core should be matched with the wiring end of the contact parts, and the span between the contact parts and the lane change should be solved.

high quality din 41612 type b connectors When conducting electric welding, the selection of multi-power ferrochrome is selected by the bare wire diameter. Electric welding time should be less than 5 seconds, in order to avoid the grounding resistance of the goods reduced, in the electric welding welding, the flux must not be allowed to enter the conductor and insulator.

A safety belt may be added between the power plug and the power socket, assuming that the high quality din 41612 type b connectors are permanently non-separable to the rear; Assuming a long time in the separation situation, it is necessary to use maintenance caps or other methods to carry out anti-fouling. Whether in the connection situation or separation situation, in order to avoid the actual effect of tangential force on the power plug and avoid damage to the high quality din 41612 type b connectors caused by loose cables, the pivot line of the power plug and the power socket should be overlated as much as possible, and the cable should be upright.

high quality din 41612 type b connectors https://www.kujunconnector.com/TYPE-B-Connectors